1. Before starting the toilet paper making machine, a power on signal must be sent to confirm no error before starting the machine.

2. When unloading paper, turn the unloading rack to 90 degrees as a safety board, and no one is allowed to stand before and after the paper roll. 

3. Transport should be concentrated during operation, pay attention to observe the operating status of the equipment and the tension of the paper web. When twin rolls appear during the operation of the toilet paper production equipment, processing must be suspended, and no one is allowed to jump over the safety railings of the toilet paper production equipment.

4. During the unloading process, anyone is allowed to stay in the unsafe area of the unloading table.

5. It is necessary to check whether the photoelectric cells placed in the dangerous area of the toilet paper production equipment are sensitive and intact to prevent accidents.

6. When operate the toilet paper rewinding machine, strictly follow the "Safe Driving Operation Regulations".

7. During operation, the operator is strictly prohibited to climb on the frame or safety cover, and is not allowed to tilt or bend into the transmission part of the reel and other dangerous areas.

8, when the paper is taped, the tape operation is not allowed before the slitting knife stops rotating. Pay attention to the paper threading operation to prevent personal accidents caused by hands and clothes caught in the equipment.

9, Must have a high sense of responsibility for safety, concentration, and operation before starting up the toilet tissue roll machine. When the machine is in operation, someone must be on the console and not leave the console at will to prevent accidents.

10, it is strictly forbidden to deal with paper jam at the entrance of the bottom roller and scrape off the roller area with a shovel. If there is a problem in the process, it must be shut down and processed.